A simple, precise, rapid, and reproducible RP -HPLC method was developed and validated for the determination of Telmisartan in Pharmaceutical dosage form. Separation was achieved under optimized chromatographic condition on a Zorbax-SB-18 ;(ODS) column (150 X 4.6 mm i.d., particle size 3.5μ).The mobile phase consisted of Pentane sulphonic acid sodium salt mono hydrate, add 1ml of Perchloric acid and adjust the pH-2.7±0.05 with Triethyl amine: Methanol in the ratio 40: 60 v/v. An isocratic elution at a flow rate of 1.2 ml/ min at ambient temperature. The detection was carried out at 230 nm using waters UVVisible detector. The calibration curve was linear in the concentration range of 4–20mg/ ml (r2? 0.9999).The limit of detection and the limit of quantification were found to be 0.2515 mg/ml and 0.6623 mg/ml respectively. The amount of Telmisartan present in the formulation was found to be 99.95. The method was validated statistically using the SD, %RSD and SE and the values are found to be within the limits and the recovery studies were performed and the percentage recoveries was found to be 99.55± 0.7211 %. So, the proposed method was found to be simple, specific, linear, and rugged. Hence it can be used for applied for routine analysis of Telmisartan in the Pharmaceutical formulations.
All Published work is licensed under a Creative Commons Attribution 4.0 International License
Copyright © 2019 All rights reserved. iMedPub LTD Last revised : June 19, 2019